Before you begin, you will need to know several things about the pilot lights, also known as low beam. Unlike some lights, these are essential. They must be at least two and operate on the left and on the right. They must also light up to 30 meters without blinding the conductors opposite. Assumed that one of the lights of the Suzuki Alto is broken, you risk a fine of 68 euros. Of course, it is for starters for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beams on the Suzuki Alto, step by step.
How to change a night light on a Suzuki Alto
Before starting the manipulations, it is essential to stop the engine. Allow approximately 5 or 10 minutes for this change of low beam on a Suzuki Alto. This operation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Suzuki Alto
- Identify the location of the lighthouse block
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fully matches
- Gently put the new bulb in its place. Check that it is stable and correctly engaged
- Replace the connector and the cover
It is done. Changing a low beam on a Suzuki Alto is a very easy and short repair, accessible at any level in the field. Good road!