First of all, you need to know some indications on the pilot lights, also called dipped beam. Unlike some lights, they are essential. They must be at least two and operate on the left and on the right. They must also light up to 30 meters without blinding the users opposite. If one of the lights of your Suzuki Jimny does not work, you risk a fine of 68 euros. Obviously, it is initially for safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beams on the Suzuki Jimny, step by step.
How to change a night light on a Suzuki Jimny
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this replacement low beam on a Suzuki Jimny. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Suzuki Jimny
- Locate the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Gently place the new bulb in its location. Make sure it is stable and properly engaged
- Put the connector in its place, but also the cover
That's it. Changing a low beam on a Suzuki Jimny is a very easy and short repair, accessible at any level in the field. Good walk!