Before setting off, you should know several indications about the pilot lights, also called low beam headlights. Unlike some lights, they are essential. They must be at least two and operate on the left as well as on the right. They must also illuminate at 30 meters without blinding the drivers in front. If one of the lights on your Suzuki Kizashi is broken, you risk a fine of 68 euros. Naturally, it is initially for reasons of safety that it is essential to replace them when they no longer work. Now let's see how to replace these low beam headlights on the Suzuki Kizashi, step by step.
How to change a night light on a Suzuki Kizashi
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam replacement on a Suzuki Kizashi. This manipulation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Suzuki Kizashi
- Locate the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to make sure it fits perfectly
- Gently put the new bulb in its place. Make sure it is stable and properly engaged
- Replace the connector, but also the cover
Its good. Replacing a low beam on a Suzuki Kizashi is a very simple and short repair, accessible to any level in the field. Enjoy the road!