Before you begin, you should know a few indications about pilot lights, also called low beam headlights. Unlike some lights, they are mandatory. They must be at least two and walk to the left as to the right. They must also illuminate at 30 meters without blinding the users vis-à-vis. If one of the lights of the Suzuki Samurai does not work, you risk a fine of 68 euros. Of course, it is to begin with for reasons of safety that it is essential to change them when they no longer work. We will now see how to change these low beams on the Suzuki Samurai, point by point.change-crossover-Suzuki-Samurai

How to change a night light on a Suzuki Samurai

Before starting the manipulations, it is necessary to switch off the engine. Allow approximately 5 or 10 minutes for this change of low beam on the Suzuki Samurai. This repair does not require any special tool, except perhaps a flat screwdriver to help you if a cover is difficult to come.

  • Open the hood of the Suzuki Samurai
  • Identify the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it fits perfectly
  • Carefully place the new bulb in its location. Watch it is fixed and well engaged
  • Put the connector in its place, but also the cover

It's OK. Replacing a low beam on the Suzuki Samurai is a very easy and quick repair, accessible to beginners. Be careful!