First of all, you will need to know several information about sidelights, the technical term of which is low beam. Unlike some lights, these are essential. They must be at least two and work left and right. They must also illuminate at 30 meters without dazzling the drivers opposite. Supposing that one of the lights on your Suzuki Sx4 S-cross is not functional, you risk a fine of 68 euros. Naturally, it is initially for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Suzuki Sx4 S-cross, point by point.change-crossover-Suzuki-Sx4-S-cross

How to change a night light on a Suzuki Sx4 S-cross

Before starting the operations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this low beam change on a Suzuki Sx4 S-cross. This manipulation does not require a specific tool, except a flat screwdriver to help you if a cover is struggling to remove.

  • Open the hood of the Suzuki Sx4 S-cross
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits completely
  • Carefully put the new bulb in its place. Check that it is stable and well engaged
  • Replace the connector, but also the cover

That's it. Changing a low beam on a Suzuki Sx4 S-cross is a very simple and short operation, accessible to beginners. Good walk!