Before you set off, you will need to understand various indications about the pilot lights, also called low beam headlights. Unlike some lights, they are essential. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without dazzling the drivers in front. If one of the lights of the Suzuki X90 does not work, you risk a fine of 68 euros. Of course, it is initially for safety reasons that it is necessary to replace them when they no longer work. Let's see now how to replace these low beams on the Suzuki X90, point by point.
How to change a night light on a Suzuki X90
Before starting operations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this low beam replacement for the Suzuki X90. This manipulation does not require any specific tool, except perhaps a flat screwdriver to help you if a cover struggles to remove.
- Open the hood of the Suzuki X90
- Identify the location of the lighthouse block
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fully matches
- Gently put the new bulb in its place. Watch that it is fixed and correctly engaged
- Put the connector in its place, but also the cover
It is done. Changing a low beam on the Suzuki X90 is a very simple and fast operation, accessible to any level in the field. Enjoy the road!