First of all, it is necessary to understand several indications on the pilot lights, the technical term of which is dipped beam. Unlike some lights, these are essential. They must be at least two and work left and right. They must also illuminate at 30 meters without dazzling the drivers in front. If one of the lights on your Toyota 1000 does not work, you risk a fine of 68 euros. Of course, it is above all for safety reasons that it is necessary to change them when they no longer work. Now let's see how to change these low beam headlights on the Toyota 1000, step by step.change-low-beam-Toyota-1000

How to change a sidelight on a Toyota 1000

Before starting operations, it is necessary to turn off the engine. Allow about 5 or 10 minutes for this low beam replacement on a Toyota 1000. This repair does not require any special tool, except perhaps a flat screwdriver to help you if a cover is struggling to remove.

  • Open the hood of the Toyota 1000
  • Identify the location of the lighthouse block
  • Remove the protective cover so as to reach the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it fits completely
  • Carefully place the new bulb in its location. Check that it is stable and well engaged
  • Replace the connector, but also the cover

It is done. Replacing a low beam on a Toyota 1000 is a very easy and short operation, accessible to any level in the field. Enjoy the road!