Before you begin, you should understand several indications on the pilot lights, also called dipped beam. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also light up to 30 meters without dazzling the users opposite. If one of the lights of your Toyota 2000 Gt Mf 10 does not work, you risk a fine of 68 euros. Obviously, it is initially for safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beam on the Toyota 2000 Gt Mf 10, step by step.
How to change a pilot light on a Toyota 2000 Gt Mf 10
Before starting the manipulations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this replacement of the low beam on the Toyota 2000 Gt Mf 10. This operation does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Toyota 2000 Gt Mf 10
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it is totally suitable
- Gently put the new bulb in its place. Make sure it is fixed and properly engaged
- Replace the connector in its place, as well as the cover
Its good. Replacing a low beam on the Toyota 2000 Gt Mf 10 is a very simple and quick repair, accessible at any level in the field. See you soon!