First of all, you should know several indications about the pilot lights, the technical term of which is low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without dazzling the users in front. If one of the lights of the Toyota Aygo is broken, you risk a fine of 68 euros. Of course, it is initially for safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beam headlights on the Toyota Aygo, step by step.
How to change a sidelight on a Toyota Aygo
Before starting the manipulations, it is essential to turn off the engine. Allow approximately 5 or 10 minutes for this low beam replacement on the Toyota Aygo. This operation does not require any specific tool, apart from perhaps a flat screwdriver to help you if a cover struggles to come.
- Open the hood of the Toyota Aygo
- Identify the location of the lighthouse block
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it is fully suitable
- Gently place the new bulb in its location. Check that it is stable and well engaged
- Put the connector back in its place, but also the cover
It is done. Changing a low beam on the Toyota Aygo is a very easy and short repair, accessible to all levels in the field. Good road!