Before setting off, you should understand various indications about the pilot lights, also called low beam headlights. Unlike some lights, these are mandatory. They must be at least two and work on the left as well as on the right. They must also illuminate at 30 meters without blinding the drivers in front. If one of the lights on your Toyota Camry 2 is not functional, you risk a fine of 68 euros. Obviously, it is above all for safety reasons that it is necessary to replace them when they no longer work. We will now see how to replace these low beams on the Toyota Camry 2, point by point.
How to Change a Night Light on a Toyota Camry 2
Before starting operations, it is necessary to turn off the engine. Allow approximately 5 or 10 minutes for this low beam replacement for the Toyota Camry 2. This manipulation does not require any particular tool, except perhaps a flat screwdriver to help you if a cover is difficult to come by.
- Open the hood of the Toyota Camry 2
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it is totally suitable
- Gently put the new bulb in its place. Watch it is fixed and well engaged
- Replace the connector in its place, as well as the cover
It's OK. Changing a low beam on the Toyota Camry 2 is an extremely quick and easy operation, accessible to beginners. Enjoy the road!