First of all, you need to know various indications about pilot lights, the technical term of which is low beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as well as on the right. They must also illuminate 30 meters without blinding motorists in front. If one of the lights of the Toyota Corolla 6 does not work, you will risk a fine of 68 euros. Obviously, it is above all for safety reasons that it is necessary to change them when they no longer work. We will now see how to change these low beam headlights on the Toyota Corolla 6, step by step.change-crossover-Toyota-Corolla-6

How to Change a Night Light on a Toyota Corolla 6

Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam replacement for the Toyota Corolla 6. This repair does not require any special tool, apart from perhaps a flat screwdriver to help you if a cover has trouble fitting. withdraw.

  • Open the hood of the Toyota Corolla 6
  • Locate the location of the headlight unit
  • Remove the protective cover in order to access the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it is totally suitable
  • Gently put the new bulb in its place. Watch that it is stable and correctly engaged
  • Replace the connector, but also the cover

It is done. Replacing a low beam on the Toyota Corolla 6 is a very simple and fast operation, accessible to any level in the field. Good road!