Before you start, you should know a few things about the pilot lights, also known as low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light up 30 meters without blinding motorists opposite. If one of the lights of your Toyota Corolla 7 does not work, you risk a fine of 68 euros. Naturally, it is primarily for safety reasons that it is necessary to change them when they no longer work. We will now see how to change these low beams on the Toyota Corolla 7, step by step.
How to Change a Night Light on a Toyota Corolla 7
Before starting the manipulations, it is essential to stop the engine. Allow about 5 or 10 minutes for this change of low beam on the Toyota Corolla 7. This operation does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to come .
- Open the hood of the Toyota Corolla 7
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it is totally suitable
- Place the new bulb gently in its location. Make sure it is fixed and properly engaged
- Put the connector back in its place, but also the cover
It's OK. Replacing a low beam on the Toyota Corolla 7 is an extremely easy and short operation, accessible to any level in the field. See you soon!