First of all, you should know various indications about the pilot lights, also called dipped beam headlights. Unlike some lights, these are essential. They must be at least two and work left and right. They must also illuminate 30 meters without dazzling motorists in front. If one of the lights on your Toyota Corolla 9 does not work, you risk a fine of 68 euros. Naturally, it is initially for reasons of safety that it is essential to change them when they no longer work. We will now see how to change these low beams on the Toyota Corolla 9, point by point.
How to Change a Night Light on a Toyota Corolla 9
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam change on the Toyota Corolla 9. This repair does not require a specific tool, except a flat screwdriver to help you if a cover has trouble coming.
- Open the hood of the Toyota Corolla 9
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it is totally suitable
- Place the new bulb gently in its location. Make sure that it is fixed and correctly engaged
- Replace the connector and the cover
It's OK. Changing a low beam on the Toyota Corolla 9 is an extremely quick and easy operation, accessible to beginners. Good road!