First of all, you should know various indications about the pilot lights, the technical term of which is dipped beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without dazzling the drivers opposite. If one of the lights on your Toyota Crown is not functional, you risk a fine of 68 euros. Of course, it is first and foremost for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beam headlights on the Toyota Crown, step by step.
How to Change a Night Light on a Toyota Crown
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on the Toyota Crown. This manipulation does not require any particular tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota Crown
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Carefully place the new bulb in its location. Watch it is fixed and well engaged
- Put the connector in its place, but also the cover
It is done. Replacing a low beam on the Toyota Crown is an extremely easy and short operation, accessible to any level in the field. Be careful!