First of all, you will need to understand a lot of information about sidelights, the technical term of which is low beam. Unlike some lights, these are essential. They must be at least two and work left and right. They must also illuminate at 30 meters without blinding the conductors opposite. If one of the lights on your Toyota Cs & s does not work, you risk a fine of 68 euros. Of course, it is above all for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beam headlights on the Toyota Cs & s, step by step.change-low-beam-Toyota-Cs & s

How to change a sidelight on a Toyota Cs & s

Before starting operations, it is essential to turn off the engine. Allow about 5 or 10 minutes for this change of low beam for the Toyota Cs & s. This repair does not require any particular tool, except perhaps a flat screwdriver to help you if a cover has trouble coming in.

  • Open the hood of the Toyota Cs & s
  • Identify the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure that it fits completely
  • Gently place the new bulb in its location. Watch that it is stable and correctly engaged
  • Replace the connector in its place, as well as the cover

It is done. Replacing a low beam on the Toyota Cs & s is a very easy and fast repair, accessible to any level in the field. Good road!