Before starting, you need to know several information about the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and operate on the left and on the right. They must also light up at a distance of 30 meters without blinding the users opposite. If one of the lights of your Toyota Dyna does not work, you risk a ticket of 68 euros. Obviously, it is primarily for security reasons that it is necessary to change them when they no longer work. We will now see how to change these low beams on the Toyota Dyna, point by point.
How to Change a Night Light on a Toyota Dyna
Before starting operations, it is essential to stop the engine. Allow about 5 or 10 minutes for this change of low beam for the Toyota Dyna. This repair does not require any special tool, except a flat screwdriver to help you if a cover is hard to come by.
- Open the hood of the Toyota Dyna
- Identify the location of the headlight unit
- Remove the protective cover in order to access the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits completely
- Carefully place the new bulb in its location. Watch that it is fixed and correctly engaged
- Put the connector back in its place, but also the cover
That's it. Changing a low beam on the Toyota Dyna is an extremely simple and quick repair, accessible to beginners. Good road!