Before you start, you need to know several things about the pilot lights, also known as low beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as on the right. They must also light at a distance of 30 meters without dazzling the users opposite. If one of the lights of the Toyota Endo does not work, you risk a ticket of 68 euros. Of course, it is to start with safety reasons that it is necessary to replace them when they no longer work. Now let's see how to replace these low beams on the Toyota Endo, point by point.
How to Change a Night Light on a Toyota Endo
Before starting the manipulations, it is necessary to stop the engine. Allow approximately 5 or 10 minutes for this replacement low beam on the Toyota Endo. This operation does not require any special tool, except a flat screwdriver to help you if a cover has trouble coming.
- Open the hood of the Toyota Endo
- Locate the location of the headlight unit
- Remove the protective cover in order to reach the fire block
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Carefully put the new bulb in its place. Watch that it is fixed and correctly engaged
- Put the connector in its place, but also the cover
Its good. Replacing a low beam on the Toyota Endo is a very easy and quick operation, accessible to any level in the field. Be careful!