Before starting, you should know various indications about the pilot lights, the technical term of which is dipped beam. Unlike some lights, they are mandatory. They must be at least two and work on the left as well as on the right. They must also illuminate at a distance of 30 meters without blinding the conductors opposite. If one of the lights on your Toyota Fine-s does not work, you risk a fine of 68 euros. Obviously, it is initially for safety reasons that it is necessary to change them when they no longer work. Now let's see how to change these low beam headlights on the Toyota Fine-s, step by step.change-low-beam-Toyota-Fine-s

How to change a sidelight on a Toyota Fine-s

Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam change for the Toyota Fine-s. This operation does not require any special tool, except perhaps a flat screwdriver to help you if a cover has difficulty removing.

  • Open the hood of the Toyota Fine-s
  • Locate the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits perfectly
  • Gently place the new bulb in its location. Check that it is stable and well engaged
  • Put the connector back in its place, but also the cover

It's OK. Replacing a low beam on the Toyota Fine-s is an extremely simple and fast operation, accessible to any level in the field. Goodbye!