Before you start, you need to know some information about the pilot lights, whose technical term is low beam. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also light up to 30 meters without blinding motorists vis-à-vis. In the event that one of the lights of the Toyota Ft-hs is not functional, you risk a fine of 68 euros. Of course, it is first of all for security reasons that it is essential to change them when they no longer work. We will now see how to change these low beam on the Toyota Ft-hs, step by step.
How to Change a Night Light on a Toyota Ft-hs
Before starting operations, it is essential to stop the engine. Allow approximately 5 or 10 minutes for this replacement low beam for the Toyota Ft-hs. This operation does not require any special tool, except perhaps a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota Ft-hs
- Identify the location of the lighthouse block
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits completely
- Carefully place the new bulb in its location. Watch that it is stable and well engaged
- Replace the connector in its place, as well as the cover
It is done. Replacing a low beam on the Toyota Ft-hs is a very easy and quick operation, accessible to beginners. Good road!