Before setting off, you should know various information about sidelights, also called low beam headlights. Unlike some lights, these are essential. They must be a minimum of two and operate on the left and on the right. They must also illuminate at a distance of 30 meters without blinding the drivers in front. If one of the lights of the Toyota Fxs does not work, you risk a fine of 68 euros. Of course, it is first and foremost for reasons of safety that it is essential to change them when they no longer work. We will now see how to change these low beam headlights on the Toyota Fxs, step by step.
How to change a sidelight on a Toyota Fxs
Before starting operations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this low beam replacement for the Toyota Fxs. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota Fxs
- Identify the location of the lighthouse block
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to make sure it fits completely
- Gently place the new bulb in its location. Watch it is fixed and well engaged
- Replace the connector, but also the cover
It is done. Changing a low beam on the Toyota Fxs is an extremely easy and short repair, accessible to any level in the field. Be careful!