Before you begin, you need to understand various information about pilot lights, also known as low beam headlights. Unlike some lights, they are mandatory. They must be at least two and work left and right. They must also illuminate at 30 meters without blinding the conductors opposite. If one of the lights of the Toyota Hi Ace 3 is not functional, you risk a fine of 68 euros. Of course, it is above all for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beam headlights on the Toyota Hi Ace 3, step by step.change-low-beam-Toyota-Hi-Ace-3

How to change a sidelight on a Toyota Hi Ace 3

Before starting the operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam replacement for the Toyota Hi Ace 3. This operation does not require any specific tool, except a flat screwdriver to help you if a cover is hard to come by. .

  • Open the hood of the Toyota Hi Ace 3
  • Identify the location of the lighthouse block
  • Remove the protective cover in order to access the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the previous one to make sure it fits completely
  • Carefully put the new bulb in its place. Check that it is stable and correctly engaged
  • Replace the connector, but also the cover

Its good. Replacing a low beam on the Toyota Hi Ace 3 is an extremely easy and short operation, accessible to any level in the field. Enjoy the road!