First of all, you should know some indications about the pilot lights, the technical term of which is low beam. Unlike some lights, these are essential. They must be a minimum of two and operate on the left and on the right. They must also illuminate at 30 meters without blinding the motorists opposite. If one of the lights of the Toyota Hi Ace is broken, you risk a fine of 68 euros. Of course, it is initially for safety reasons that it is necessary to replace them when they no longer work. Now let's see how to replace these low beam headlights on the Toyota Hi Ace, point by point.
How to change a sidelight on a Toyota Hi Ace
Before starting operations, it is necessary to turn off the engine. Allow about 5 or 10 minutes for this change of low beam on a Toyota Hi Ace. This operation does not require a specific tool, except a flat screwdriver to help you if a cover has trouble coming.
- Open the hood of the Toyota Hi Ace
- Identify the location of the headlight unit
- Remove the protective cover in order to access the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits completely
- Carefully place the new bulb in its location. Watch that it is stable and well engaged
- Replace the connector, but also the cover
It is done. Replacing a low beam on a Toyota Hi Ace is an extremely quick and easy operation, accessible to beginners. Good walk!