First of all, you will need to know various information about the pilot lights, also called low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light at a distance of 30 meters without dazzling motorists in front. If one of the lights of your Toyota I-unit does not work, you risk a fine of 68 euros. Naturally, it is above all for safety reasons that it is necessary to change them when they no longer work. We will now see how to change these low beams on the Toyota I-unit, step by step.
How to change a night light on a Toyota I-unit
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on the Toyota I-unit. This operation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota I-unit
- Identify the location of the headlight unit
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits completely
- Place the new bulb gently in its location. Make sure it is stable and correctly engaged
- Put the connector in its place, but also the cover
Its good. Replacing a low beam on the Toyota I-unit is a very simple and short repair, accessible to any level in the field. Good road!