First of all, you will need to know several indications about the pilot lights, also called dipped beam headlights. Unlike some lights, they are mandatory. They must be at least two and walk to the left as to the right. They must also illuminate at a distance of 30 meters without blinding the conductors opposite. Suppose one of the lights on your Toyota Land Cruiser Serie 90 does not work, you could risk a fine of 68 euros. Of course, it is initially for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Toyota Land Cruiser Serie 90, point by point.change-light-low-beam-Toyota-Land-Cruiser-Serie-90

How to change a night light on a Toyota Land Cruiser Serie 90

Before starting the manipulations, it is necessary to switch off the engine. Allow approximately 5 or 10 minutes for this low beam replacement on the Toyota Land Cruiser Serie 90. This repair does not require any specific tool, apart from perhaps a flat screwdriver to help you if a cover is hard to come by.

  • Open the hood of the Toyota Land Cruiser Serie 90
  • Identify the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits completely
  • Carefully place the new bulb in its location. Check that it is stable and correctly engaged
  • Replace the connector in its place, as well as the cover

It is done. Changing a low beam on the Toyota Land Cruiser Serie 90 is an extremely simple and short repair, accessible to beginners. Good road!