Before setting off, you should know several indications about the sidelights, also called dipped beam headlamps. Unlike some lights, they are mandatory. They must be at least two and walk left and right. They must also illuminate 30 meters without blinding motorists in front. Supposing that one of the lights of the Toyota Land Cruiser Sw Serie 80 does not work, you risk a fine of 68 euros. Of course, it is first of all for safety reasons that it is necessary to replace them when they no longer work. Now let's see how to replace these low beams on the Toyota Land Cruiser Sw Serie 80, step by step.change-light-low-beam-Toyota-Land-Cruiser-Sw-Serie-80

How to change a pilot light on a Toyota Land Cruiser Sw Serie 80

Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this low beam replacement for the Toyota Land Cruiser Sw Serie 80. This manipulation does not require any special tool, except perhaps a flat screwdriver to help you if a cover has difficulty in fitting. come.

  • Open the hood of the Toyota Land Cruiser Sw Serie 80
  • Identify the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it completely matches
  • Carefully place the new bulb in its location. Make sure that it is fixed and correctly engaged
  • Put the connector in its place, but also the cover

Its good. Replacing a low beam on the Toyota Land Cruiser Sw Serie 80 is a very simple and short repair, accessible to beginners. Good road!