Before you start, you need to understand some information about pilot lights, the technical term of which is low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without blinding users in front. If one of the lights on your Toyota Mr 3 is not functional, you risk a fine of 68 euros. Of course, it is primarily for safety reasons that it is essential to replace them when they no longer work. Let's see now how to replace these low beam headlights on the Toyota Mr 3, step by step.change-crossover-Toyota-Mr-3

How to change a pilot light on a Toyota Mr 3

Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam for a Toyota Mr 3. This operation does not require any particular tool, except perhaps a flat screwdriver to help you if a cover has difficulty removing.

  • Open the hood of the Toyota Mr 3
  • Locate the location of the headlight unit
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Carefully remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it completely matches
  • Carefully put the new bulb in its place. Make sure it is fixed and properly engaged
  • Replace the connector, but also the cover

It is done. Changing a low beam on a Toyota Mr 3 is an extremely simple and short repair, accessible to all levels in the field. Good walk!