First of all, you will need to know several information about the pilot lights, whose technical term is low beam. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also light at a distance of 30 meters without dazzling the conductors opposite. If one of the lights on your Toyota Pod is not functional, you risk a ticket of 68 euros. Obviously, it is first of all for security reasons that it is essential to change them when they no longer work. Now let's see how to change these low beams on the Toyota Pod, step by step.
How to Change a Night Light on a Toyota Pod
Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on a Toyota Pod. This operation does not require any specific tool, except perhaps a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota Pod
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits perfectly
- Gently place the new bulb in its location. Watch that it is stable and well engaged
- Replace the connector in its place, as well as the cover
It's OK. Changing a low beam on a Toyota Pod is a very easy and short operation, accessible to any level in the field. See you soon!