Before you start, there are several indications on the pilot lights, also called dipped beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light up to 30 meters without dazzling the conductors opposite. If one of the lights of the Toyota Prius 3 is not functional, you risk a fine of 68 euros. Of course, it is initially for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beam on the Toyota Prius 3, step by step.
How to Change a Night Light on a Toyota Prius 3
Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on the Toyota Prius 3. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to come .
- Open the hood of the Toyota Prius 3
- Identify the location of the headlight unit
- Remove the protective cover in order to access the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to make sure it fits perfectly
- Carefully put the new bulb in its place. Make sure it is stable and properly engaged
- Replace the connector in its place, as well as the cover
That's it. Changing a low beam on the Toyota Prius 3 is an extremely simple and fast repair, accessible at any level in the field. Be careful!