First of all, you need to know several indications on the pilot lights, also called dipped beam. Unlike some lights, they are mandatory. They must be at least two and walk left and right. They must also light up to 30 meters without blinding motorists vis-à-vis. In the event that one of the lights of the Toyota Proace Verso is broken, you risk a fine of 68 euros. Naturally, it is primarily for safety reasons that it is necessary to replace them when they no longer work. We will now see how to replace these low beams on the Toyota Proace Verso, point by point.
How to Change a Night Light on a Toyota Proace Verso
Before starting the manipulations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this replacement low beam on a Toyota Proace Verso. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Toyota Proace Verso
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits completely
- Carefully place the new bulb in its location. Watch that it is fixed and correctly engaged
- Replace the connector, but also the cover
It is done. Replacing a low beam on a Toyota Proace Verso is an extremely simple and short repair, accessible at any level in the field. Enjoy the road!