Before driving off, you should know several indications about the pilot lights, also called dipped beam headlamps. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without blinding the drivers in front. If one of the lights of the Toyota Rav 4 does not work, you risk a fine of 68 euros. Of course, it is above all for safety reasons that it is essential to replace them when they no longer work. We will now see how to replace these low beam headlights on the Toyota Rav 4, step by step.change-low-beam-Toyota-Rav-4

How to change a sidelight on a Toyota Rav 4

Before starting operations, it is necessary to turn off the engine. Allow about 5 or 10 minutes for this low beam change on the Toyota Rav 4. This manipulation does not require a specific tool, except a flat screwdriver to help you if a cover has trouble coming.

  • Open the hood of the Toyota Rav 4
  • Identify the location of the headlight unit
  • Remove the protective cover in order to reach the fire block
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits perfectly
  • Place the new bulb gently in its location. Make sure it is fixed and properly engaged
  • Replace the connector, but also the cover

It's done. Changing a low beam on the Toyota Rav 4 is an extremely simple and short operation, accessible to any level in the field. Enjoy the road!