Before you start, you should know various indications on the pilot lights, also called dipped beam. Unlike some lights, these are mandatory. They must be at least two and operate on the left and on the right. They must also light at a distance of 30 meters without blinding the conductors opposite. If one of the lights of the Toyota Tercel is broken, you risk a ticket of 68 euros. Of course, it is first of all for safety reasons that it is essential to replace them when they no longer work. We will now see how to replace these low beams on the Toyota Tercel, step by step.change-crossover-Toyota-Tercel

How to Change a Night Light on a Toyota Tercel

Before starting the manipulations, it is necessary to stop the engine. Allow approximately 5 or 10 minutes for this replacement low beam for the Toyota Tercel. This operation does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to remove.

  • Open the hood of the Toyota Tercel
  • Identify the location of the lighthouse block
  • Remove the protective cover so as to gain access to the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the old one to be sure it fits perfectly
  • Carefully put the new bulb in its place. Check that it is stable and well engaged
  • Replace the connector in its place, as well as the cover

It is done. Changing a low beam on the Toyota Tercel is a very simple and quick repair, accessible at any level in the field. See you soon!