Before starting, you should know some indications about the pilot lights, the technical term of which is dipped beam. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also illuminate at 30 meters without blinding the opposite conductors. If one of the lights on your Toyota Tundra is broken, you risk a fine of 68 euros. Of course, it is first and foremost for safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beam headlights on the Toyota Tundra, step by step.
How to change a sidelight on a Toyota Tundra
Before starting operations, it is essential to turn off the engine. Allow about 5 or 10 minutes for this low beam replacement for a Toyota Tundra. This repair does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota Tundra
- Identify the location of the headlight unit
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to make sure it fits completely
- Gently put the new bulb in its place. Check that it is stable and correctly engaged
- Replace the connector, but also the cover
It's OK. Changing a low beam on a Toyota Tundra is a very quick and easy repair, accessible to beginners. Good walk!