First of all, you need to understand several information about the pilot lights, the technical term of which is low beam. Unlike some lights, they are mandatory. They must be at least two and operate on the left and on the right. They must also light up to 30 meters without dazzling vis-à-vis motorists. If one of the lights of your Toyota Urban Cruiser is not functional, you risk a ticket of 68 euros. Obviously, it is above all for safety reasons that it is necessary to replace them when they no longer work. We will now see how to replace these low beams on the Toyota Urban Cruiser, step by step.
How to Change a Night Light on a Toyota Urban Cruiser
Before starting the manipulations, it is necessary to stop the engine. Allow about 5 or 10 minutes for this replacement low beam for the Toyota Urban Cruiser. This repair does not require a specific tool, except maybe a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Toyota Urban Cruiser
- Identify the location of the headlight unit
- Remove the protective cover in order to access the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Gently place the new bulb in its location. Check that it is stable and well engaged
- Put the connector back in its place, but also the cover
That's it. Changing a low beam on the Toyota Urban Cruiser is an extremely easy and short repair, accessible to beginners. Good walk!