First of all, you need to know some information about the pilot lights, also called low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also light up to 30 meters without blinding motorists vis-à-vis. If one of the lights of the Toyota Verso does not work, you risk a ticket of 68 euros. Of course, it is primarily for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beams on the Toyota Verso, step by step.
How to Change a Night Light on a Toyota Verso
Before starting the manipulations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this replacement low beam for the Toyota Verso. This operation does not require any special tool, except a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Toyota Verso
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Gently place the new bulb in its location. Check that it is stable and well engaged
- Put the connector in its place, but also the cover
That's it. Replacing a low beam on the Toyota Verso is an extremely easy and short operation, accessible to any level in the field. Enjoy the road!