First of all, you need to know several indications on the pilot lights, also called dipped beam. Unlike some lights, these are mandatory. They must be at least two and operate on the left and on the right. They must also light at a distance of 30 meters without blinding the conductors opposite. Assumed that one of the lights of your Toyota Yaris 2 is not functional, you will risk a fine of 68 euros. Of course, it is for starters for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the Toyota Yaris 2, point by point.
How to change a night light on a Toyota Yaris 2
Before starting the manipulations, it is necessary to stop the engine. Allow approximately 5 or 10 minutes for this replacement low beam for a Toyota Yaris 2. This repair does not require a specific tool, except a flat screwdriver to help you if a cover is difficult to remove.
- Open the hood of the Toyota Yaris 2
- Locate the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it is totally suitable
- Carefully place the new bulb in its location. Check that it is stable and correctly engaged
- Put the connector back in its place, but also the cover
That's it. Replacing a low beam on a Toyota Yaris 2 is a very simple and fast operation, accessible at any level in the field. See you soon!