First of all, you need to know some information about pilot lights, the technical term of which is low beam. Unlike some lights, they are essential. They must be at least two and walk left and right. They must also illuminate at 30 meters without blinding the conductors opposite. If one of the lights on your Volkswagen Golf 7 Sw does not work, you risk a fine of 68 euros. Obviously, it is primarily for safety reasons that it is essential to replace them when they no longer work. We will now see how to replace these low beam headlights on the Volkswagen Golf 7 Sw, step by step.
How to change a night light on a Volkswagen Golf 7 Sw
Before starting operations, it is necessary to switch off the engine. Allow about 5 or 10 minutes for this low beam change on the Volkswagen Golf 7 Sw. This operation does not require any specific tool, except perhaps a flat screwdriver to help you if a cover is difficult to come by.
- Open the hood of the Volkswagen Golf 7 Sw
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the old one to be sure it fits perfectly
- Gently put the new bulb in its place. Check that it is stable and correctly engaged
- Put the connector back in its place, but also the cover
It is done. Changing a low beam on the Volkswagen Golf 7 Sw is an extremely easy and short operation, accessible to all levels in the field. Be careful!