Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a super operation convenient to make . But when a fire no longer works, it should not be long to replace it. Because some people ignore it, but it is reprehensible by a ticket which can go up to 68 euros. Obviously, you have to start by changing them for safety reasons. So here is how to change the headlight bulb on your Volkswagen Buggy, step by step. Second, we will find out how to properly fix them.change-bulb-headlight-Volkswagen-Buggy

How to change the bulb of a Volkswagen Buggy headlight

Today there are various types of headlight bulbs. The most common are halogen , however there are also Xenon , put on the side now, and more and more light bulbs LED . The latter consume less electricity and are more robust. Regardless of the type of bulb, the way to change them will be identical. So here is the logic to follow in order to changing the bulb of your Volkswagen Buggy .

  • Disconnect the battery so that you can work more serenely.
  • Clear access to the rear portion of the light. Sometimes it will be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the broken bulb from the Volkswagen Buggy
  • Compare it with the news to make sure it is suitable
  • Position the new bulb gently, then fix it properly
  • Replace the rubber cover and all of the components, following the reverse procedure.

Now that everything is in order, check that it works! The latter should display the same intensity as the other. It is essential to have totally similar products.

How to adjust the headlights of a Volkswagen Buggy

Now that the fire is in place, it remains plausible that it is out of order. It is extremely important that two lights at the same height and focused the same way. In particular not to annoy motorists opposite. They should therefore be adjusted properly. For that, you just have to position your car facing a wall. First one meter from the wall, then a few meters. Second, you just have to adjust the fire in question in the same way as the other according to the reflections on the wall. If neither goes, there are tutorials that can help.