Whether it's about the low beams, high beams or turn signals, the changing a light bulb is a very repair easy to execute . But if a light no longer works, you should not delay changing it. Because some people ignore it, but it is punishable by a penalty of up to 68 euros. Naturally, it will first be necessary to repair them for safety reasons. Here is how to change the bulb of a headlight on your Opel Rekord, point by point. Next, we will find out how to set them correctly.
How to change the bulb of a Opel Rekord lighthouse
Nowadays, there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and more and more bulbs LED . These are much less greedy in electricity and more resistant. No matter what kind of bulb, the way to change them will be similar. You will find below the logic to follow for change the bulb of your Opel Rekord .
- Disconnect the battery so that you can work more serenely.
- Clear access to the rear portion of the light. It will sometimes be necessary to disassemble the battery, or covers.
- Remove the rubber or plastic cover on the back of the fire
- Unclip or unscrew the broken bulb of the Opel Rekord
- Compare it well with the new one to make sure it matches
- Place the new bulb gently, then fix it correctly
- Reclip the rubber cover and all the elements following the reverse procedure
Now that everything is in place, check that it works! This one should have an intensity equal to the other. It is essential to have perfectly similar models.
How to properly configure the headlights of an Opel Rekord
Now that the fire is in place, it remains possible that it is out of order. It is extremely important that two lights at the same height and focused the same way. Among other things so as not to annoy motorists in the other direction. That's why you have to take the time to adjust them correctly. To do this, simply position your automobile facing a wall. First a meter from the wall, then a few meters. Thereafter, simply adjust the light with the new bulb to the same height as the other by comparing the halos. If the two are incorrectly adjusted, there are tutorials that can help you.