Whether it's for low beam, high beams or turn signals, the bulb replacement is a super repair easy to perform . But when a fire stops working, it should not be long before replacing it. Because some people do not know it, but this is punishable by a fine which can go up to 68 euros. Of course, they will have to be replaced first for safety reasons. This is how to replace the bulb of a headlight on an Opel Movano 2, step by step. In a second step, we will find out how to properly adjust them.
How to replace the bulb of a Opel Movano 2 headlight
Today, there are a number of types of headlight bulbs. The most common are halogen , however there are also Xenon , somewhat put on the side now, and lots of bulbs LED . The latter are much less energy consuming and more enduring. Whatever the type of bulb, the way to replace them will be similar. You will find below the logic to follow in order to replace the bulb in your Opel Movano 2 .
- Disconnect the battery so that you can work more comfortably.
- Free access to the rear part of the light. Sometimes it will be necessary to remove the battery, or else covers.
- Remove the rubber or plastic cover on the back of the light
- Remove the fixing or unscrew the broken bulb from the Opel Movano 2
- Compare it well with the new one to be sure it fits
- Position the new bulb gently, then fix it properly
- Replace the rubber cover and then all of the components, following the reverse procedure
Once everything is in place, check that it works! The latter should display an intensity equal to the other. It is essential to have completely identical models.
How to properly adjust the headlights of an Opel Movano 2
Now that the fire is in place, it remains possible that it is out of order. It is very important that two lights at the same height and focused the same way. In particular so as not to obstruct the conductors in the other direction. That is why they must be settled properly. To do this, you must position your vehicle facing a wall. First one meter from the wall, then a few meters. In a second step, simply adjust the fire with the new bulb at the same height as the other according to the reflections on the wall. If neither of them goes, there are tutorials that can help you.