That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely convenient to do . But if a fire never works, you should not wait to change it. Because many do not know it, but this is reprehensible by a fine which can go up to 68 euros. Of course, it will first have to be repaired for safety reasons. So here is how to change the bulb of a headlight on an Opel Olympia, step by step. In the second step, we will find out how to set them correctly.change-bulb-headlight-Opel-Olympia

How to change the bulb of a Opel Olympia lighthouse

Now there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , a little put on the side now, and a lot of bulbs LED . These are much less energy intensive and more robust. Regardless of the type of bulb, the way to change them will be similar. You will find below the logic to follow for change the bulb of your Opel Olympia .

  • Disconnect the battery so that you can work more quietly.
  • Free access to the rear part of the light. It will sometimes be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover behind the fire
  • Remove the fixing or unscrew the broken bulb from your Opel Olympia
  • Compare it well with the new one to make sure it matches
  • Put the new bulb down gently, then fix it correctly
  • Reclip the rubber cover and all the elements in the other direction

Once everything is in place, test the bulb! This one should display the same intensity as the other. It is essential to have perfectly similar models.

How to adjust the headlights of an Opel Olympia

Now that the fire is in place, it remains plausible that it is out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy the motorists you meet. It is therefore advisable to take the time to adjust them correctly. To do this, simply position your vehicle in front of a wall. First a short distance, then a few meters. In a second step, you just have to adjust the fire in question at the same height as the other according to the reflections on the wall. If the two are poorly adjusted, there are tutorials very well done on this subject.