Before driving off, you should understand various indications about the pilot lights, also called low beam headlights. Unlike some lights, these are essential. They must be at least two and walk left and right. They must also illuminate at 30 meters without blinding the drivers in front. If one of the lights of the jeep wrangler is broken, you risk a fine of 68 euros. Of course, it is primarily for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beams on the jeep wrangler, point by point.change-low-beam-jeep-wrangler

How to change a night light on a jeep wrangler

Before starting operations, it is necessary to switch off the engine. Allow approximately 5 or 10 minutes for this low beam replacement on a jeep wrangler. This operation does not require any particular tool, apart from perhaps a flat screwdriver to help you if a cover struggles to come.

  • Open the hood of the jeep wrangler
  • Identify the location of the lighthouse block
  • Remove the protective cover in order to reach the light unit
  • Disconnect the connector
  • Gently remove the bulb from the low beam
  • Compare the new bulb with the previous one to be sure it fits perfectly
  • Gently place the new bulb in its location. Make sure it is fixed and correctly engaged
  • Replace the connector, but also the cover

That's it. Replacing a low beam on a jeep wrangler is a very easy and short operation, accessible to any level in the field. See you soon!