Before you start, you should know some information about sidelights, the technical term for which is low beam. Unlike some lights, they are mandatory. They must be at least two and walk left and right. They must also illuminate at a distance of 30 meters without blinding the conductors opposite. Supposing that one of the lights on the Kia Carens 3 does not work, you will risk a fine of 68 euros. Of course, it is above all for safety reasons that it is essential to change them when they no longer work. We will now see how to change these low beam headlights on the Kia Carens 3, step by step.
How to change a night light on a Kia Carens 3
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam for the Kia Carens 3. This manipulation does not require any particular tool, except perhaps a flat screwdriver to help you if a cover struggles to remove.
- Open the hood of the Kia Carens 3
- Identify the location of the headlight unit
- Remove the protective cover so as to reach the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fits completely
- Carefully put the new bulb in its place. Check that it is stable and correctly engaged
- Put the connector back in its place, but also the cover
Its good. Changing a low beam on the Kia Carens 3 is an extremely simple and short operation, accessible to beginners. Goodbye!