First of all, you need to know several information about the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and operate on the left and on the right. They must also light at a distance of 30 meters without dazzling the conductors opposite. If one of the lights of your Kia Cee D 2 Sw does not work, you risk a ticket of 68 euros. Naturally, it is initially for safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beams on the Kia Cee D 2 Sw, step by step.
How to change a night light on a Kia Cee D 2 Sw
Before starting operations, it is essential to switch off the engine. Allow approximately 5 or 10 minutes for this replacement low beam on the Kia Cee D 2 Sw. This manipulation does not require any specific tool, except maybe a flat screwdriver to help you if a cover is difficult to remove .
- Open the hood of the Kia Cee D 2 Sw
- Identify the location of the headlight unit
- Remove the protective cover in order to access the fire block
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it fully matches
- Carefully place the new bulb in its location. Watch that it is stable and well engaged
- Put the connector back in its place, but also the cover
It's OK. Changing a low beam on the Kia Cee D 2 Sw is an extremely simple and fast operation, accessible at any level in the field. Be careful!