Before you start, you will need to know various indications about pilot lights, the technical term of which is low beam. Unlike some lights, these are mandatory. They must be at least two and walk left and right. They must also illuminate 30 meters without dazzling the drivers in front. If one of the lights on your Smart Crossblade is not functional, you risk a fine of 68 euros. Of course, it is primarily for safety reasons that it is essential to replace them when they no longer work. Now let's see how to replace these low beam headlights on the Smart Crossblade, step by step.
How to change a night light on a Smart Crossblade
Before starting operations, it is essential to switch off the engine. Allow about 5 or 10 minutes for this change of low beam on the Smart Crossblade. This operation does not require any specific tool, except perhaps a flat screwdriver to help you if a cover has trouble coming.
- Open the hood of the Smart Crossblade
- Locate the location of the headlight unit
- Remove the protective cover in order to reach the light unit
- Disconnect the connector
- Carefully remove the bulb from the low beam
- Compare the new bulb with the previous one to make sure it fits completely
- Gently put the new bulb in its place. Watch that it is fixed and correctly engaged
- Replace the connector in its place, as well as the cover
It is done. Changing a low beam on the Smart Crossblade is an extremely easy and short operation, accessible to beginners. Enjoy the road!