First of all, you need to know several indications on the pilot lights, whose technical term is low beam. Unlike some lights, these are mandatory. They must be at least two and work on the left as on the right. They must also light at a distance of 30 meters without blinding motorists vis-à-vis. If one of the lights on the Smart Crosstown is not functional, you will be fined 68 euros. Obviously, it is to start with safety reasons that it is essential to change them when they no longer work. Now let's see how to change these low beams on the Smart Crosstown, step by step.
How to change a night light on a Smart Crosstown
Before starting operations, it is essential to stop the engine. Allow approximately 5 or 10 minutes for this replacement low beam for the Smart Crosstown. This manipulation does not require any special tool, except maybe a flat screwdriver to help you if a cover is difficult to come.
- Open the hood of the Smart Crosstown
- Identify the location of the headlight unit
- Remove the protective cover so as to gain access to the light unit
- Disconnect the connector
- Gently remove the bulb from the low beam
- Compare the new bulb with the previous one to be sure it completely matches
- Carefully place the new bulb in its location. Watch that it is fixed and correctly engaged
- Replace the connector and the cover
It's OK. Replacing a low beam on the Smart Crosstown is a very easy and short operation, accessible to any level in the field. Enjoy the road!