Whether it's for low beam, high beams or turn signals, the changing a light bulb is a super repair simple to execute . But if a fire never works, you should not delay in repairing it. Because some people forget it, but it remains reprehensible by a fine of up to 68 euros. Of course, you will first have to repair them for safety reasons. This is how you can replace the headlight bulb on your Nissan Juke, step by step. Second, we will see how to properly adjust them.change-bulb-headlight-Nissan-Juke

How to replace the bulb of a Nissan Juke headlight

Nowadays, there are several types of headlight bulbs. The most common are halogen , however there are also Xenon , slightly put on the side now, and lots of bulbs LED . They consume much less electricity and are more robust. Regardless of the type of bulb, the way to replace them will be similar. Here is the procedure to follow in order to replace the bulb in your Nissan Juke .

  • Disconnect the battery to work more comfortably.
  • Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the defective bulb from your Nissan Juke
  • Compare it with the new one to be sure it fits
  • Place the new bulb gently, then fix it properly
  • Replace the rubber cover and then all of the components, following the reverse procedure.

Once everything is in place, test the bulb! This should have an intensity similar to the other. It is essential to have totally similar models.

How to adjust the headlights of a Nissan Juke

After replacing a light, it is still possible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to disturb the drivers you meet. They should therefore be adjusted properly. To do this, you must position your automobile facing a wall. First one meter from the wall, then a few meters. Second, you just have to adjust the light with the new bulb in the same way as the other by comparing the halos. If neither of them goes, there are tutorials very well done on this subject.