That it concerns low beam, high beams or turn signals, the changing a light bulb is an extremely convenient to perform . But in the event that a light no longer works, it should not be delayed to replace it. Because some people ignore it, but this remains punishable by a fine of up to 68 euros. Obviously, they will have to be repaired first for safety reasons. So here's how to replace the headlight bulb on a Nissan Leaf, step by step. In a second step, we will find out how to properly adjust them.
How to replace the bulb on a Nissan Leaf headlight
Now there are various types of headlight bulbs. The most common are halogen , however we can also find Xenon , slightly put on the side now, and lots of bulbs LED . The latter consume much less electricity and are more enduring. Regardless of the type of bulb, the way to replace them will be similar. Below is the logic to follow in order to replace the bulb of your Nissan Leaf .
- Disconnect the battery to work more comfortably.
- Free access to the rear portion of the fire. At times it will be necessary to disassemble the battery or covers.
- Remove the rubber or plastic cover behind the fire
- Remove the fixing or unscrew the broken bulb from the Nissan Leaf
- Compare it well with the new one to be certain that it is suitable
- Place the new bulb gently, then fix it properly
- Replace the rubber cover and all components in the opposite direction
Now that everything is in place, check that it works! The latter should have the same intensity as the other. It is essential to have completely identical models.
How to set the headlights of a Nissan Leaf
After replacing a light, it is possible that it will be out of order. It is extremely important that two lights at the same height and focused in the same way. Among other things, so as not to disturb motorists in front. We must therefore take the time to adjust them properly. To do this, you just have to position your car facing a wall. First a short distance, then 5 or 6 meters. Secondly, it suffices to adjust the light in question to the same height as the other by comparing the halos. If both are incorrectly set, there are tutorials that can help you.