Whether it's for low beam, high beams or turn signals, the bulb replacement is a very operation simple to make . But in the event that a light no longer works, you should not wait to change it. Because some people ignore it, but it remains condemnable by a sanction which can go up to 68 euros. Naturally, you will have to start replacing them for safety reasons. Here is how to change the bulb of a headlight on your Nissan Maxima 3, step by step. Second, we will see how to properly adjust them.change-headlight-bulb-Nissan-Maxima-3

How to replace the bulb of a Nissan Maxima 3 headlight

Today, there are a number of types of headlight bulbs. The most common are halogen , but there are also Xenon , somewhat put on the side today, and a lot of bulbs LED . These are less energy consuming and more enduring. Whatever the type of bulb, the way to replace them will be identical. You will find below the logic to follow in order to change the bulb in your Nissan Maxima 3 .

  • Disconnect the battery so that you can work more comfortably.
  • Clear access to the rear part of the light. Sometimes it will be necessary to disassemble the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the broken bulb from the Nissan Maxima 3
  • Compare it with the new one to make sure it matches
  • Put the new bulb down gently, then fix it properly
  • Replace the rubber cover and all components in reverse order

Now that everything is back in order, check that it works! The latter should display the same intensity as the other. It is important to have totally similar models.

How to properly adjust the headlights of a Nissan Maxima 3

After replacing a light, it is possible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy motorists in the other direction. They must therefore be settled properly. To do this, you must place your car facing a wall. First a short distance, then a few meters. Second, just set the light in question to the same height as the other according to the reflections on the wall. If the two are poorly tuned, there are very good tutorials on this.