That it concerns low beam, high beams or turn signals, the bulb replacement is a very manipulation simple to do . But if ever a fire does not work any more, it should not be delayed to repair it. Because many do not know it, but it remains reprehensible by a fine which can go up to 68 euros. Of course, you are going to have to change them first for safety reasons. Here is therefore how to replace the bulb of a headlight on your Nissan Maxima 4, step by step. Subsequently, we will find out how to properly adjust them.change-headlight-bulb-Nissan-Maxima-4

How to change the bulb of a Nissan Maxima 4 headlight

Now there are various types of headlight bulbs. The most common are halogen , but there are also Xenon , slightly put on the side now, and lots of bulbs LED . They are much less energy-intensive and more resistant. Regardless of the type of bulb, the way to change them will be the same. So here is the process to follow for replace the bulb in your Nissan Maxima 4 .

  • Disconnect the battery in order to work more quietly.
  • Free access to the rear portion of the fire. At times it will be necessary to remove the battery, or covers.
  • Remove the rubber or plastic cover on the back of the light
  • Unclip or unscrew the damaged bulb from your Nissan Maxima 4
  • Compare it well with the new one to make sure it is suitable
  • Put the new bulb down gently, then fix it correctly
  • Reclip the rubber cover and all components in the opposite direction

Now that everything is back in order, test the bulb! The latter should display an intensity equal to the other. It is essential to have perfectly identical models.

How to properly adjust the headlights of a Nissan Maxima 4

After replacing a light, it is plausible that it will be out of order. It is very important that two lights at the same height and in the same axis. Among other things so as not to annoy the drivers in the other direction. This is why they must be set correctly. To do this, all you have to do is place your automobile in front of a wall. First one meter from the wall, then five or six meters. Then, you just have to adjust the fire in question to the same height as the other by comparing the halos. If neither of them works, there are tutorials that can help you.