That it concerns low beam, high beams or turn signals, the bulb replacement is an extremely repair simple to make . But if a light does not work, you should not wait to change it. Because some people ignore it, but this is punishable by a fine which can go up to 68 euros. Naturally, it is necessary to replace them for safety reasons first. Here is therefore how to change the bulb of a headlight on the Nissan Maxima, point by point. Second, we will find out how to set them correctly.change-bulb-headlight-Nissan-Maxima

How to change the bulb of a Nissan Maxima headlight

Now there are several types of headlight bulbs. The most common are halogen , but we can also find Xenon , a little put on the side now, and a lot of bulbs LED . They consume less energy and are more robust. Whatever the type of bulb, the way to change them will be identical. Here is the logic to follow in order to change the bulb of your Nissan Maxima .

  • Disconnect the battery to work more comfortably.
  • Clear access to the rear part of the light. From time to time it will be necessary to remove the battery, or else covers.
  • Remove the rubber or plastic cover on the back of the light
  • Remove the fixing or unscrew the damaged bulb from the Nissan Maxima
  • Compare it with the news to make sure it fits
  • Position the new bulb gently, then fix it correctly
  • Replace the rubber cover and all the elements in the other direction

Now that everything is in order, test the bulb! This one should have an intensity equal to the other. It is essential to have perfectly similar products.

How to set the headlights of a Nissan Maxima

After replacing a light, it is plausible that it will be out of order. It is extremely important that two lights at the same height and in the same axis. Among other things so as not to obstruct the conductors in the other direction. That's why you have to take the time to adjust them correctly. To do this, you must place your automobile facing a wall. To start one meter from the wall, then a few meters. Second, just set the fire with the new bulb in the same way as the other by comparing the halos. If neither of them goes, there are tutorials that can help you.